Insight in every device
The new Energy Socket helps you to understand the energy consumption of your devices and is now 50% smaller in size. Place it in the wall socket, plug it into your device and start measuring!
The new Energy Socket helps you to understand the energy consumption of your devices and is now 50% smaller in size. Place it in the wall socket, plug it into your device and start measuring!
Energy Socket turns your devices off on times you don’t need them, like your TV and peripherals at night or your kitchen boiler’s warm water. With timers you can control which devices should be turned on or off and when. Every 1 Watt reduced on your standby consumption saves you over €3 per year!
1W = 0.024kWh p/day x €0.40 x 365 days = €3.50 per year
Every device with a plug can be measured and switched on and off by the Energy Socket, even the production of plug-in solar panels. The HomeWizard Energy app shows you the measurements down to the second, or in detailed day, week and month graphs with cost indication.
The HomeWizard Energy app shows you what’s happening right now, or go back in time with detailed historical graphs.
Suitable for small and big appliances with a range of 1W to 3680W
Individually calibrated for accurate measurements (±99,5%)
Optimised for a low power usage of 1 Watt
Automatic overload (16A), overheat and child protection
Get even more out of your Energy Socket
for €0.99 per month.
Turn on appliances when you have a solar surplus.
Get even more than the standard 12 months of storage, so you can compare years and seasons.
Turn off devices when power consumption is too high
Want to use more of your solar power? With the P1 Meter and Energy Socket you can measure and switch devices based on your solar surplus. Turn on your kitchen boiler or start charging your e-bike for example. (Energy+ required)
More information about the P1 Meter802.11b/g/n (2.4 GHz) WiFi
WPA2 and WPA3 encrypted
Energy usage history of the past 12 months
Extend your energy usage history with an Energy+ subscription
Automatic security updates
128bits AES encryption with TLS/SSL
Max. 3680W (16A), Continuous load: 2760W (12A)
The Energy Socket turns off automatically when the device plug or outlet contact is generating a unsafe amount of heat indicating bad contact or sustained maximum load.
Combined edge/pin-earth plug (Netherlands/Belgium)
1 Watt
Open API (JSON)
2 year warranty
Energy Socket
Quickstart guide
An iOS 13, Android 8 or higher mobile device
A secure Wi-Fi network with internet connection
Read detailed information in the General terms or in our Privacy policy
What is a Energy Socket, and what is it used for?
A Energy Socket is a smart plug that allows you to control connected devices remotely and measure power consumption. You can use the socket to remotely turn on or off devices such as lamps, televisions, or coffee makers by using timers.
How do I install the Energy Socket and connect it to the app?
Installing the Energy Socket is easy. Plug the socket into the wall and connect the device you want to control. Then, download the HomeWizard Energy app and follow the instructions to connect the socket to the app.
Can I use the Energy Socket with other smart home systems?
The Energy Socket cannot be installed on other systems, but it can work in conjunction with other smart home systems. Therefore, you can have multiple smart home systems in your home alongside the HomeWizard smart home system.
Which devices can I connect to the Energy Socket?
You can connect any device that fits in a regular power outlet and uses no more than 3680 watts